/content/fplgp/us/en/landing/led-tariff.html

Colder weather can impact your power bill. Monitor your usage now at FPL.com/waystosave

Turkey Point facts

LED lighting

Light-emitting diode (LED) is the preferred lighting standard for communities of all sizes.

As LED gains popularity, manufacturers worldwide are phasing out traditional lighting such as high-pressure sodium vapor (HPSV). For communities that have not yet made the switch, the question is not if they should upgrade, but when. 

Have a light in need of repair? Use our tool to report an outage

Why change now?

  • Savings — Switching to LED lighting typically saves 25-50% in energy over traditional technologies.
  • Better for constituents — Higher-quality lighting makes a big difference to a community’s appeal, safety, and comfort. It livens up main streets and gathering spots by making them more inviting to residents and encourages active lifestyles by offering safer walking, biking, outside play and socializing.
  • Turnkey service — We handle all aspects of the project, from initial design to responsive post-installation maintenance.

Benefits of FPL’s Lighting Service

an icon of a hand holding a dollar sign

Little to no upfront cost required

an icon of a hand holding a dollar sign

Material, installation, maintenance and energy costs are paid in monthly service fees

an icon of a hand holding a dollar sign

All lights are equipped with Smart Nodes that can auto-generate light outage notification

an icon of a hand holding a dollar sign

24/7 maintenance provided by FPL

What we offer

Street outdoor lighting

We offer a variety of premium streetlights which provide a whiter, brighter and more consistent light with LED technology, designed to meet customer needs through the LT-1 Tariff.

View LED Lighting Catalog

Email us or call 1-844-4FPL-LED to get started

If you are requesting a Street Light, please contact your local municipality for more information.

Parking lot outdoor lighting 

We offer a well-designed LED lighting system that makes your private property, parking lots, and common areas more attractive, inviting, and enhances your customers’ and employees’ comfort and security.

LT-1 Tariff

View LED Lighting Catalog

Email us or call 1-844-4FPL-LED to get started

outdoor-lighting-house.jpg

We offer energy efficient lighting solutions on existing utility facilities to make your home or business safer while enhancing its curb appeal.

View Outdoor Lighting Catalog

To get started, complete the Outdoor Lighting request formYou must fill out the form and make sure you attach the Outdoor Light form, otherwise your request will not be processed.

Contact a lighting expert

If you are requesting a new Streetlight, please contact your local municipality for more information prior to completing the form. For outdoor and area lighting requests, please download the Outdoor Light Request form and include it with your submission below. 

**Please download Outdoor Light Request form, and attach it below.

cloud_upload

Upload Outdoor Request Form

{{uploadedfilename}}
{{ fileuploaderror }} Submit Reset

Additional information and resources

FPL can provide lighting to meet customer’s unique location or sustainability requirements and provide quality nighttime illumination.

At FPL, we work closely with builders/developers, homeowner groups and the Counties we serve to facilitate establishment of street lighting MSBUs. The MSBU is an excellent vehicle for customers to obtain and pay for lighting services. While the procedures vary slightly from county to county, the MSBU enables homeowners to install and pay for lighting services either through an annual assessment on the property tax bill or a monthly assessment on the water bill (depending on the county). Once the MSBU is approved, the County becomes Gulf’s customer of record for the MSBU. The County utilizes the funds collected through the MSBU assessment to pay Gulf Power for the monthly lighting services.

To view a county’s policy, please click on the name below:

Escambia County

Santa Rosa County

Okaloosa County

If you are requesting a SL, please contact your local municipality for more information.

Color Rendering General expression for the effect of a light source on color appearance of objects when compared with their color appearance under a reference light source. The Color Rendering Index (CRI) scale ranges from 0 to 100, with higher numbers designating better color rendering.
Correlated Color Temperature (CCT) The color appearance of light produced by a light source measured with the Kelvin Scale (K). Low CCTs have a warm appearance (red, orange, yellow). High CCTs have a cool appearance (blue or blue-white).
Efficacy The ratio of light from a lamp, fixture or luminaire to the electrical power (watts) consumed. Usually expressed in lumens per watt.
Efficiency The absolute percentage of light produced within a fixture that is not absorbed by the fixture, but actually leaves the fixture.
Footcandle (fc) A quantitative unit for measuring luminance; the illumination on a surface one foot square on which there is a uniformly distributed flux of one lumen.
HID High intensity discharge lighting, including mercury vapor, high pressure sodium and metal halide light sources.
Illuminance (Illumination) The total amount of visible light illuminating a point on a surface from all directions above the surface.
Lamp A light source. Lamps used for outdoor lighting include high intensity discharge, incandescent and fluorescent.
Lamp Lumen Depreciation A factor used in lighting calculations to account for the light loss that takes place in a lamp due to the gradual decay in lumen output over a specified period of burning time.
Lens The shielding or diffuser portion of a fixture made of plastic or glass, through which the light passes on its way to the seeing task.
Lighting Distribution Luminaires are classified according to the manner in which they control or distribute the luminous flux.
Light Emitting Diode (LED) An LED is a small light source that becomes illuminated by the movement of electrons through a semiconductor material. LEDs have the ability to produce large numbers of lumens from far less energy (watts) than conventional light sources.
Light Loss Factor A factor used in calculating the level of illumination after a given period of time and under given conditions that takes into account dirt accumulations on the luminaire, lamp depreciation, maintenance procedures and atmosphere conditions.
Light Trespass A situation which occurs when, due to lack of adequate beam control, light from a source is distributed onto areas where the illumination is not wanted.
Lumen The unit of light output. Light output is also referred to as light flux.
Luminaire (outdoor lighting fixture) A complete lighting unit consisting of a lamp or lamps together with the parts designed to distribute the light, position and protect the lamps, and to connect the lamps to the power supply.
Luminaire Dirt Depreciation (LDD) A factor used in lighting calculations to account for the light loss due to the accumulation of dirt on the luminaire. The LDD is contingent upon environment, cleaning schedules and the type of luminaire used.
Mounting Height The vertical distance between the luminaire and the surface to be lighted. It includes both the pole length and the base above grade to which the pole is mounted.
Optical System The lamp cavity or environment designed as part of the luminaire for the purpose of controlling light output.
Reflector A device used to direct the light from a source by the process of reflection.
Refractor A device used to direct the luminous flux from a source primarily by the process of refraction.
Uniformity A measure of how evenly or smoothly the lighting level is spread over an area. It is expressed as a uniformity ratio of average foot-candles divided by the minimum allowable foot-candles. The lower the ratio, the better. Visually, observing an area with bright spots beneath outdoor lighting fixtures surrounded by dark spots is an indication of poor lighting uniformity.
Watt A measure of the amount of electrical power required by a product to operate at any given instant.
page not found