page not found
Back To Suppliers

Metal Acceptance Checker

Select a metal type:
  1.  Base Filler

Base Metal - Grade 91 CMTR Acceptance Checker

Notes:
1. Please fill the following information by extracting data from the Certified Material Test Report (CMTR).
2. If there is more than one heat number on the CMTR, then the information needs to be inserted per heat number.
3. If the value is not available for a specific element on the CMTR, leave the entry blank
4. For technical questions contact Keith Rapkin @ (561) 691-2617 or Keith.Rapkin@fpl.com

All The values below should be in percentage ( % )
  1. Yes No
  5. Yes No
CMTR is Rejected
CMTR is Approved
However, it is strongly recommended to provide a UTS test report along with the CMTR to the purchaser prior to sell!

Filler Metal - Grade 91 CMTR Acceptance Checker

Notes:
1. Please fill the following information by extracting data from the Certified Material Test Report (CMTR).
2. If there is more than one heat number on the CMTR, then the information needs to be inserted per heat number.
3. If the value is not available for a specific element on the CMTR, leave the entry blank
4. For technical questions contact Keith Rapkin @ (561) 691-2617 or Keith.Rapkin@fpl.com

All The values below should be in percentage ( % )
  1. GTAW SMAW
CMTR is Rejected
CMTR is Approved